Cryptocurrency Mining

지난24시간 동안 채굴효율 좋은 알고리즘

1BTC=$37,569.67

===================================================

NVIDIA RTX 3060 Ti = Ethash = DaggerHashimoto = ETH

NVIDIA RTX 3070

NVIDIA RTX 3080

NVIDIA RTX 3090 23hr51min21.6sec=DaggerHashimoto

                        8min38.4sec=GrinCuckatoo32

NVIDIA RTX 2080 Ti 15hr59min2.4sec=DaggerHashimoto 

                           3hr47min31.2sec=GrinCuckatoo31 [2.6] $4.4

===================================================

ETH

www.f2pool.com/

1 MH/s ≈ 0.00006885 ETH ≈ $ 0.0822

www.nicehash.com/algorithm

2.0026 BTC/TH/day

≈ 0.0019556640625 BTC/GH/day

≈ 0.00000190982818603515625 BTC/MH/day

≈ 0.0713 $/MH/day

===================================================

GrinCuckatoo32

www.f2pool.com/

1 g/s≈ 10.62361214 GRIN-32 ≈ $ 4.38

www.nicehash.com/algorithm

0.1070 BTC/kG/day

≈ 0.0001044921875 BTC/G/day

≈ 3.9257 $/G/day

===================================================

GrinCuckatoo31

www.nicehash.com/algorithm

0.0466 BTC/kG/day

≈ 0.0000455078125 BTC/G/day

≈ 1.7097 $/MH/day

ethermine.org/

Hashrate 64.7 TH/s

Active Miners 79024

Workers 359745

Blocks/h 56.5

zcash.flypool.org/

Hashrate 430.5 MH/s

Active Miners 1902

Workers 7219

Blocks/h 3

ycash.flypool.org/

Hashrate 7.0 kH/s

Active Miners 47

Workers 89

Blocks/h 11.42

etc.ethermine.org/

Hashrate 1.9 TH/s

Active Miners 3990

Workers 13366

Blocks/h 68.54

beam.flypool.org/

Hashrate 7.5 kH/s

Active Miners 102

Workers 158

Blocks/h 1.54

ravencoin.flypool.org/

Hashrate 162.7 GH/s

Active Miners 1187

Workers 2976

Blocks/h 7.04

[2021-01-07]

Changes (Over 1.17)

• Improved linux zombie mode power draw & speed Polaris GPUs (R9 380, RX Fury, RX 4x0 and RX 5x0). Depending on configuration, the zombie mode now uses 0.5 to 1W less energy and is 0.2 to 0.4 mh/s faster.
• Added --zombie-tune parameter for Polaris GPUs. This will increase the performance of zombie mode (further up on the general improvement) by an other 5-15%, depending on parameter and epoch (later epochs profit more). Default value is 0 (off), for most cards the value of 2 is optimal. If you see cards getting slower then before, set to 0 or 1. Note: you either can give one value for the whole rig or provide a comma separated list for each card individually. Cards not running zombie mode ignore the parameter.
• The parameter --4g-alloc-size can now also be set for each card individually
• Slight rework of Beam Hash III back end. Improves poolside hash rate by approx 0.2 to 0.3% - displayed hashrate and power consume kept equal.
• Added a 4G_Ethash_Linux_Readme.txt file to the Linux release, giving guidance how to configure for ideal zombie mode performance.

Bug fixes

• Fixed: segmentation fault when the dns resolve of a pool fails #109
• Fixed: miner does not restart after connection loss. #108
• Applied potential fix for "address or port already in use" bug.

Bug fixes (1.18a)

• Miner not mining ETC correctly
• Reverted some internal parameters that might cause instability of 1.18

Compatibility note:

The new zombie-tune parameter has only been tested with amdgpu-pro 20.30 and 20.40. Other drivers might cause issues.
Also make sure your mining rig is configured to use PCIe-gen 2 connection to your GPUs.

Example effect of --zombie-tune parameter on the hash rate in Zombie Mode

Note: it may be needed to tune each card individually. Tune value of 2 works for most cards, but some do not like the mode, especially when on PCIe-gen1 riser.

ethermine.org/

Hashrate 64.2 TH/s

Active Miners 77036

Workers 356194

Blocks/h 58.67

zcash.flypool.org/

Hashrate 429.9 MH/s

Active Miners 1891

Workers 6983

Blocks/h 3.38

ycash.flypool.org/

Hashrate 7.1 kH/s

Active Miners 48

Workers 91

Blocks/h 12.08

etc.ethermine.org/

Hashrate 2.0 TH/s

Active Miners 4009

Workers 13531

Blocks/h 67.25

beam.flypool.org/

Hashrate 7.8 kH/s

Active Miners 105

Workers 164

Blocks/h 0.92

ravencoin.flypool.org/

Hashrate 168.3 GH/s

Active Miners 1162

Workers 2990

Blocks/h 6.46

[2021-01-06]

github.com/develsoftware/GMinerRelease/releases/tag/2.40

• significant performance improvements for KAWPOW, especially on rigs with large number of GPUs
• improved compatibility with Ravencoin pools (miningpoolhub.com)
• added option to control DAG buffering mode (single or dual, --dag_mode)
• added option to support "Zombie Mode" for Ethash, Etchash and KAWPOW algortihms (--dag_limit)
• improved detection of freezing AMD GPUs under linux
• fixed display of core and memory clocks under linux
• display GPU PCI index on miner startup
• removed unpopular algorithms: sero, vprogpow, progpowz, cuckarood29, cuckarood29v

Ethash fee is 0.65%
KAWPOW fee is 1%

[2021-01-05]

github.com/andru-kun/wildrig-multi/releases/tag/0.28.3

just a minor release with phi5 algo(Combode coin). As always be careful with new coins.

www.bminer.me/releases/

[2021-01-05]

• Fix compatiblity issues with ETH pools that use the ethproxy protocols (e.g. sparkpools

ethermine.org/

Hashrate 63.3 TH/s

Active Miners 75329

Workers 351737

Blocks/h 58.58

zcash.flypool.org/

Hashrate 429.0 MH/s

Active Miners 1900

Workers 7030

Blocks/h 2.33

ycash.flypool.org/

Hashrate 6.9 kH/s

Active Miners 42

Workers 82

Blocks/h 10.5

etc.ethermine.org/

Hashrate 2.0 TH/s

Active Miners 4010

Workers 13484

Blocks/h 70.75

beam.flypool.org/

Hashrate 7.7 kH/s

Active Miners 107

Workers 167

Blocks/h 1.29

ravencoin.flypool.org/

Hashrate 155.8 GH/s

Active Miners 1148

Workers 2826

Blocks/h 6.79

ethermine.org/

Hashrate 65.1 TH/s

Active Miners 72334

Workers 344990

Blocks/h 60.04

zcash.flypool.org/

Hashrate 432.2 MH/s

Active Miners 1874

Workers 7176

Blocks/h 2.38

ycash.flypool.org/

Hashrate 6.8 kH/s

Active Miners 44

Workers 84

Blocks/h 9.96

etc.ethermine.org/

Hashrate 2.1 TH/s

Active Miners 4008

Workers 14077

Blocks/h 69.25

beam.flypool.org/

Hashrate 7.8 kH/s

Active Miners 94

Workers 150

Blocks/h 1.08

ravencoin.flypool.org/

Hashrate 175.9 GH/s

Active Miners 1140

Workers 2916

Blocks/h 5.33